Current line

AM Series - selfpowered full-range / mid-high boxes
AS Series - selfpowered subwoofers
MP Series - multipurpose loudspeakers
PM Series - full-range / mid-high boxes
PS Series - subwoofers

AM-1 Wide dispersion selfpowered mid/high / full range loudspeaker

AM-1 is a selfpowered 15" neodymium speaker and 2" neodymium compression driver mounted on a 100 x 50 degree horn. With a weight of only 27,5 kg's, the AM-1 is very suitable for portable use in rental and for bands etc. As an option, single point flying anchors can be mounted, adding flexibilty when installing in venues or for use as delay.

Description - Technical data - Frequency response and dispersion - High Res picture

PM-1 is the passive version of AM-1 - (400W RMS / 80W RMS)

AM-2 Narrow dispersion, arrayable, selfpowered mid/high loudspeaker

AM-2 is a selfpowered 15“ and 2“ system, designed to meet the demand for compact, arrayable, high powered, high precision mid/high loudspeakers for touring and other professional use. Designed for maximum configuration of 4 wide 2 deep flying providing high SPL for in- and outdoor use. Easy flyingsystem ensures fast setup and low powerconsumption eases power requirements.

Description - Technical data - Frequency response and dispersion - Flying system - High Res picture

PM-2 is the passive version of AM-2 - (600W RMS / 100W RMS)

AS-2 selfpowered high SPL dual eighteen inch subwoofer

The AS-2 is a self-powered dual eighteen inch subwoofer, designed to meet the demand for compact, high-powered, ultra-low frequency subwoofers for touring and other professional use. Low powerconsumption eases power reequirements, and makes it possible to feed 4 pcs. AS-2 from one single 230V/16A feed. Ultra low frequency response down to 24 Hz ensures true low frequency reproduction.

Description - Technical data - High res picture

PS-2 is the passive version of AS-2 - (1200W RMS)

AS-1+ selfpowered high SPL eighteen inch subwoofer

AS-1+ is a selfpowered 18" subwoofer in a basreflex configuration. Due to the integrated ribs, safe stacking is possible when using PS-1's or multiple AS-1'+'s. AS-1+ is equipped with link out to one PS-1 (unamplified) when dual 18" systems are required. When stacked, the AS-1+/PS-1 can reach a height of 160 cm, giving enough height to place an AM-1 on top.

Description - Technical data - High res picture

PS-1 is the passive version of AS-1+, designed to be operated from either AS-1+ or amplified by external amps.

MP-81 - 225W RMS / 800W peak multipurpose 8" + 1", 90 x 60 dispersion

MP-81 is an 8" + 1" cabinet in a very attractive design, usefull on both stick and as floor monitor. The very high peak power ensures a high output and high definition sound from a very small box. Assymetrical design of cabinet eliminates standing waves inside the cabinet and improves transient response. Max SPL is calculated to 125dB and frequency response is 72-19kHz (+/- 3dB).

Description - Technical data - High res picture

MP-152 - 480W RMS / 1600W peak multipurpose 15" + 1,4", 80 x 60 dispersion

MP-152 is an 15" + 1,4" cabinet in a very attractive design, usefull on both stick and as floor monitor. The very high peak power ensures a high output and high definition sound from a very small box. Assymetrical design of cabinet eliminates standing waves inside the cabinet and improves transient response. Max SPL is calculated to 133dB and frequency response is 55-18kHz (+/- 3dB) (with DSP).

Description - Technical data - Crown P.I.P. settings - High res picture

EV-AMP - Evaluation amp - 1x2000W into 2 Ohm, no heat, no noise. For OEM customers wishing to evaluate the D-PAC class D amplification module. Intended for lab use only.

Description - Technical data

D-PAC Products - new products coming '04

Kvistgaard, September 2003

We currently have the following products under development.

Single 18“ subwoofer - selfpowered + extra amplifier module to power passive mid/high box.
Single 15" subwoofer - selfpowered + extra amplifier module to power passive mid/high box.
Single 12" subwoofer - selfpowered + extra amplifier module to power passive mid/high box.
15" + 12" + 1,4" mid/high box with neodymium drivers - selfpowered, weight 35 kgs
12“ + 2“ mid/high box with Neodymium drivers - selfpowered, weight 25 kgs
12“ + 2“ mid/high box with Neodymium drivers - passive/biamp, weight 20 kgs
10" + 1" multi functional box - passive
12“ + 1,4“ multi functional box with neodymium drivers - passive/biamp, weight 16 kgs

Other are also on the drawing board.
Your comments, suggestions and experience are extremely valuable to us.